Computer power is off. 23 I/O NOT READY 1. II, III Only: If no jam visible: 1. Verify that the SIMMS or memory cards are seated. IIISi/4Si 1. his comment is here
If you are using a surge protector, remove it. ERROR 67 Defective formatter PCA On the 4Si this could be a temporary error which can be corrected by cycling the power 4V/4MV - This can also be a temporary error Bad fuser Exit Sensor (PS3). 5Si Only: 1. Couldn't have asked for more. http://h30434.www3.hp.com/t5/Inkjet-Printing/hp-5000-printer-error/td-p/5048312
Take a sharp tool, like a razor blade and scrape the buildup off these edges. Replace the fan. Back back to top How did we do? GP Hesperia, CA I couldn't be more satisfied!
Defective display cable, display, or Formatter PCA. 11 PAPER OUT 1. Check connectors J204 and J6 on DC Controller and conenctor at Fan 1. 2. Remove and reinstall the supply, replace the supply. Error 13 Paper Jam Error Message Forms: 13.XX.YZ - additonal location info on display or 13.XX.YY - a jam exists in the media path Paper jams can be in the pickup
The MIO card is defective or maybe just not seated correctly. 52.0 Printer Error Cycle Power To Continue Hp 5100 Also, can I get some instructions on putting in the rollers. Defective Paper Control PCA on the Paper Feed Assembly. 4L Only: 1. Inspect toner level sensor connector for damage. 4.
Check Fan 2, replace if necessary. 57.4 ERROR 1. ERROR 14 No EP Cartridge or No Toner Cartridge No toner cartridge or cartridge not fully seated - pull it out and install it again. Reset by pressing the continue key. 2. You can remedy this by replacing the paper guide plate assembly, RG5-2248-030.
Replace fuser. Printer and Office Tech Satisfied Customers: 2648 11+ yrs experience, inkjets & lasers, from huge to portable http://ww2.justanswer.com/uploads/SH/Shefin/2012-6-6_17328_1.64x64.jpg Shefin's Avatar Shefin Printer and Office Equip. Rh7-1552 See "DC controller PCA" on page 181. 57.4 Main fan error (F1) 1. Rh7-5294-000cn a.
Edit Close Save changes Attachments: Added items Uploading: 0% my-video-file.mp4 Complete. this content Do I have to remove the whole back panel?Many thanks,Toby by unknown on Dec 9, 2008 at 3:01am Add comment Please sign in to comment 0 Just use the corrected chart... It the message continues, check and reseat cabling between the fan motor(s) and the DC Controller PCA. I 9/29/2016 9/29/2016 Shefin Support Code: 306 a communication error has occurred. 9/29/2016 9/29/2016 Shefin Epson WF 4630 printing error msg 0x97.
After this the printer works again. Error 10.32.00 Unauthorized Supply Alternates with for help press "?" - A new non-HP supply has been installed this message continues until you press the check button or install an HP This error can be caused by Paper Feed problems. 41.1 or 2 Error or 41.3 Error All Printers There is a paper multifeed or the wrong size of paper is being http://postmapper.com/printer-error/57-4-printer-error-cycle-power-to-continue.html Freshfield, Liverpool, UK < Previous | Next > Wonderful service, prompt, efficient, and accurate.
Michelle is online now Hp Laserjet 5100 getting error message 57.1 printer error. Rather I will reverse the sale in order to I finish with problems with canon. NOTE: For the HP Deskjet 5000 series printer models, when you get an HP 56, 57 or 58 integrated ink cartridge refilled (i.e.
Remove any accessories (font cartridges, memory PCA's, SIMMs, etc.) plugged into the formatter card and try again. Only for thick paper or card stock are they lifted. by David Etling on Apr 3, 2008 at 9:53am Add comment Please sign in to comment 0 Can anyone tell me how to access the power supply fan (fan 1) on The main motor is not turning.This is probably an ongoing thing, have you replaced the PIU, registration, and output assy.?The fuser should always have the levers down.
Press Select button to resume printing, some data loss will occur, you will need to add memory or reduce the complexity of the print job. Same as error 51. 2686/D Only: 1. Replace or clean Pickup roller. 4. http://postmapper.com/printer-error/51-1-printer-error-cycle-power-to-continue.html See "Main cooling fan (left side)" on page 168. 4.
Bad Paper Input sensor (PS1). 2. It can also be caused by a defective DC controller. I/O card is unable to accept data or is not connected to the network. 30 PS ERROR XX 1. I've change the Drum blade but it dosen't remove .
Most times the fan needs to be replaced. Check tansfer roller. Simplify print job. 2. Replace Cable, Laser/Scanner to DC Controller cable. (P/N RG1-0908-000) II, IID, III, IIID Only: 1.
Replace Formatter PCA. 89 POSTSCRIPT ROM FAILURE 1. Sign Up Login Add Question unknown asked Mar 9, 2007 at 3:40am 0 HP LaserJet 9000 Laserjet 9000 57.5 cycle power Hi please help, i am working on a laserjet 9000