Action Press (Select) to clear the message and continue. The control panel will display COLD RESET . If the 49 error returns, turn the power off, and then unplug the printer. The top edge of the black bar overlaps the magenta on the left, and the cyan on the right, (you can see white between the cyan and the black on the http://postmapper.com/printer-error/51-2y-printer-error-4600.html
top 57.3 PRINTER ERROR to continue turn off and on Description A printer fan error has occurred with the cartridge fan (vertical fan). HP CLJ 4600 Features HP Color Laser Jet 4600 Characteristics HP Color 4600 Perfomance * 17 pages per minute (PPM) for letter size paper and 16 PPM for A4 size paper. Be sure both covers are closed before printing. Tech Support Support Home PageMaintenance Kit InstructionsOther instructionsTroubleshootingArticles, news, blog Featured Articles HP Error CodesEntering Service ModeService mode PIN codesCounterfeit parts challengeCold reset instructionsClearing maintenance countJetDirect Reference GuideHalf-way testRepetitive defect rulerTestimonialsInnovations http://www.printertechs.com/printer-troubleshooting/346-51-2c-51-m-51-2y-51-2k-error-on-hp-color-laserjet-4600
Continue holding the green check button until the Ready, Data, and Attention lights flash once, and then stay on steady. cycle power 2. The printer will perform a cold reset and then continue its power-on sequence. Description There are multiple paper jams in the paper path or duplex path.
Watch QueueQueueWatch QueueQueue Remove allDisconnect Loading... Before initializing NVRAM, print a Configuration page and a supplies status page to gather the following information: Total page count and color page count Transfer kit count Fuser kit count Serial Turn on the printer. Laser Scanner Assembly For Hp Color Laserjet 4600 Series Action Lift the top cover.
Some data will be lost. Description Paper has jammed or crumpled into an accordion fold as it enters the fuser. Before initializing NVRAM, print a Configuration page and a supplies status page to gather the following information: Total page count and color page count Transfer kit count Fuser kit count Serial great post to read alternates with TO CONTINUE PRESS The flash DIMM or hard disk storage device is full. 79 PRINTER ERROR TO CONTINUE TURN PRINTER OFF THEN TURN ON A critical error has occurred.
Use Calibrate now. 51.2y Printer Error 5500 Use Web Jetadmin software to delete files from the storage device. If unexpected behavior occurs, turn the printer off and then turn it back on again. Watch the control panel.
This can be done by lowering the resolution of graphics and/or printing at a lower resolution. http://www.fixyourownprinter.com/posts/44617 Some data will be lost. Hp 4600 Laser Scanner Assembly If the 49 error returns, turn the power off, and then unplug the printer. 51.2y Error 4600 Turn on the printer.
Turn off the printer and then turn it back on again. http://postmapper.com/printer-error/59-5a00-hp-4600-error.html Turn on the printer. See Figure 2. Press (Select). 51.2c Printer Error
Pull open the Electrostatic Transport Belt (ETB). 41.5 UNEXPECTED TYPE IN TRAY XX FOR HELP PRESS ? If this message persists, contact an HP-authorized service or support provider. Cold reset the printer. his comment is here Press (Select).
Remove the surge protector or Uninterruptible Power Supply (UPS) and connect the printer directly to a power source. Rg5-6380 Action Lift the top cover. The printer will perform a cold reset and then continue its power-on sequence.
If the message persists, adding additional memory to the printer may allow printing of more complex pages. 22 EIO X BUFFER OVERFLOW alternates with TO CONTINUE PRESS Too much data was Press (Up Arrow) until NVRAM INIT is highlighted. If no paper is found, re-adjust all paper guides in trays to ensure settings are correct. Hp 4600 Laser Scanner Replacement If the error persists, contact HP Customer Care Support.
When the memory starts counting, press and hold the (Select) button. Press (Select). Turn on the printer. http://postmapper.com/printer-error/4600-51-2-m-error.html top 62 NO SYSTEM TO CONTINUE TURN OFF THEN ON Description No system was found.
When the memory starts counting, press and hold the green (Select) button. Check for a loose parallel cable connection (disconnect and reconnect the cable at both ends to be sure) and be sure to use a high-quality cable. Loading... Turn on the printer.
The control panel will display SELECT LANGUAGE . Reseat the EIO card. Move to a different memory slot to determine if the slot is bad. Possible printer control panel error messages and what they mean 10.10.00 - The printer cannot read or write to the black print cartridge memory tag, or the memory tag is missing.
Action Press the Cancel Job button. Press (Down Arrow) button once. alternates with LOAD TRAY XX: [TYPE] [SIZE] The printer senses a different paper or print media type in the paper path than configured in the tray. For use in the HP Color LaserJet 4600 series, not for use in the 4610 or 4650 series.
Advertisement Autoplay When autoplay is enabled, a suggested video will automatically play next. Has 0-3 options. The display should show SKIP DISK LOAD . If the message persists, turn the printer off and then back on again.