Home > Printer Error > 51.2 K Printer Error

51.2 K Printer Error

Contents

Watch the control panel. Press (Select) to select PRINT QUALITY . Continue holding the green (Select) button until the Ready, Data, and Attention lights flash once, and then stay on steady. Press (Select) to print the Configuration page. navigate here

The 80 error indicates that the Color LaserJet 4600 series printer is experiencing a problem with either the printer's network card or the network connection to the printer. Action Turn the printer off and then back on again. This may be unsupported memory. Press (Select) to access the Menu on the Control Panel. http://www.printertechs.com/printer-troubleshooting/346-51-2c-51-m-51-2y-51-2k-error-on-hp-color-laserjet-4600

51.2 K Printer Error 5500

The control panel will display SELECT LANGUAGE . Continue holding the green (Select) button until the Ready, Data, and Attention lights flash once, and then stay on steady. Turn the printer off, and turn it on again.

Before initializing NVRAM, print a Configuration page and a supplies status page to gather the following information: Total page count and color page count Transfer kit count Fuser kit count Serial Description Non-HP yellow print cartridge installed. Open the fuser cover and remove the paper. 51.2y Error 4600 Action Turn off the printer.

Continue holding the green check button until the Ready, Data, and Attention lights flash once, and then stay on steady. 51.2 M Printer Error precisionroller 23,628 (na) panonood 3:45 RM1 2555 scanner error hp laserjet 5200 5200n how to fix repair - Tagal: 4:48. If this message persists, contact an HP-authorized service or support provider. If this message persists, contact an HP-authorized service or support provider.

If the error returns, remove the yellow cartridge and turn off the printer. Hp 4600 Laser Scanner Assembly Action Lift the top cover. Gumagawa... Continue holding the green (Select) button until the Ready, Data, and Attention lights flash once, and then stay on steady.

51.2 M Printer Error

Industry-Specific IT We're a small managed services consultancy that is under a slightly larger non-tech company. Unscrew two blue knobs located on each side above the control panel. 51.2 K Printer Error 5500 Click here to order LaserJet 4600 series laser scanner assembly, part# RG5-6390 Click here to order LaserJet 4650/4610 series laser scanner assembly, part# RG5-7474 / RG5-7475 How to Replace the Laser 51.2c Printer Error Reseat the EIO card.

If you are 100% certain the laser is a known good one, and the DC controller is tested, then you have wires, and the formatter left. check over here Continue holding the green check button until the Ready, Data, and Attention lights flash once, and then stay on steady. Pull paper by bother corners to remove it. Technical Forums Copier Technical Discussion Canon Konica Minolta Kyocera Mita, Copystar Muratec Panasonic Ricoh, Savin, Gestetner, Lanier Sharp Samsung Toshiba Xerox Other Copier Brands Fax & Printer Technical Discussion Brother Canon 51.2k Printer Error 5500

Additionally, click here for more detailed instructions for clearing paper jams . (This link will demonstrate clearing paper jams on an HP Color LaserJet 4650 series printer, which is very similar Check the paper pickup assembly for jammed media. The control panel will display SELECT LANGUAGE . his comment is here The control panel will display COLD RESET .

alternates with TO CONTINUE PRESS Description One or more settings saved on the flash DIMM or hard disks have changed or are invalid. 51.2y Printer Error 5500 If this message persists, contact an HP-authorized service or support provider. The control panel will display SELECT LANGUAGE .

Release the check button when the Ready, Data, and Attention light are on steady.

When the memory starts counting, press and hold the green (Select) button. If this message persists, contact an HP-authorized service or support provider. Action Turn off the printer. Rg5-6380 If this message persists, contact an HP-authorized service or support provider.

Whenever the printer is ready, not busy, and has no pending warning messages, the status message READY is displayed if the printer is online. Warning messages display information about data and print errors. The control panel will display COLD RESET . weblink top 10.00.YY SUPPLIES ERROR For help press ?

I need respons ASAP! Pull open the front cover. Wait for the printer to calibrate. When the memory starts counting, press and hold the green (Select) button.

alternates with LOAD TRAY XX: [TYPE] [SIZE] Description The printer senses a different paper or print media type in the paper path than configured in the tray. Turn on the printer again. Cold reset the printer. Continue holding the (Select) button until the Ready, Data, and Attention lights flash once, and then stay on steady.

Action Turn the printer off, and turn it on again. The control panel messages below are listed in numerical order. Press (Select) to select CALIBRATE NOW or QUICK CALIBRATE NOW . The four laser / toner motors spin OK and the disengagement bar seems to be moving it's full range (up and down).

Has 0-3 options. Action Press (Select) to clear the message and continue. The printer will perform a cold reset and then continue its power-on sequence. Status messages .

Perform a cold reset on the printer. Action Turn the printer off, and turn it on again. The control panel will display SELECT LANGUAGE . When the memory starts counting, press and hold the green (Select) button.

Check the three metal contacts on the right side of each print cartridge to make sure they are in place and that nothing is obstructing them. Security As soon as I walked into the door this morning, I saw a ticket come through which one of our staff was asking about changes to her desktop icons. Wait for the printer prompt to install each print cartridge.

© Copyright 2017 postmapper.com. All rights reserved.